HP Officejet Pro 8710 ink replacement is done when the ink levels become low or empty in the ink cartridges. You need to purchase the genuine ink cartridges from HP SureSupply for replacement. Third-party products may damage your HP printer.
QUICK STEPS FOR THE HP OFFICEJET PRO 8710 INK REPLACEMEN
- Check if the 123.hp.com/ojpro8710 printer is turned on.
- Use the slot on the left to open the cartridge access door.
- Wait until the holder moves to the left and becomes idle.
- Push and pull the cartridge to remove it.
- Hold the new replacement ink cartridge on its sides.
- Insert it into the relevant slot by matching the letters.
- Redo the same process if you replace any other cartridges.
- Close the HP printer’s cartridge access door.
DETAILED GUIDANCE ON THE HP OFFICEJET PRO 8710 INK REPLACEMENT
- Check the ink levels periodically from the control panel or the HP application on your computer. Buy the replacement ink cartridges from the HP Store or HP SureSupply.
- Make sure that you don’t get the cartridges from the local retailers. It can spoil your print quality and damage your printer. The genuine ink cartridges will enhance the printer’s life span.
- Confirm that the HP Officejet printer is turned on. Make use of the slots present on the left side of the printer and pull it to open the printer ink cartridge access door.
- Wait until the carriage moves to the left by itself and becomes silent. Press the empty ink cartridge inwards to release it from the slot and pull it by holding on its sides.
- Tear the new ink cartridge package and carry it on either sides. Discard any protective tapes and insert the cartridge into the relevant slot facing the contacts towards the printer.
- Insert the cartridge by sliding it into the slot. Match the letter on the ink cartridge to the letter indicated on the cartridge slot. Ensure that you don’t lift the latch handle on the carriage.
- Try to avoid touching the handle that spoils the print mechanism and causes printing problems. It may create printhead or ink cartridge problem.
- Push the newly installed cartridge forward into the slot. Press it until you hear the tick sound to denote the ink cartridge is well seated into the slot.
- Redo the same process for the remaining ink cartridges. Always ensure that you match the letters on the cartridge to the carriage slot to avoid quality issues.
- Close the HP printer’s cartridge access door after replacing the ink cartridges. Wait until the printer calibrates the installed product and becomes silent.