The HP Officejet 6600 printer setup involves unboxing the packaging material and setting up the printer model by using the user manual. Then, switch on the printer, install the cartridges, place the papers and the pages prints successfully with no errors or issues.
Steps to setup HP Officejet 6600 printer
- Unpack the printer and place it on a flat surface.
- Load papers into the main input tray.
- Connect the network cable if you connect it to the network.
- Fix the phone cable for fax if necessary.
- Connect the power properly into the outlet.
- Locate the power button on the printer and press it.
- Update the firmware by using the control panel.
- Install the printer software using USB wired or wireless connection and the pages prints successfully.
Elaborate steps for setting up of HP Officejet 6600 printer
- Check the seal of the package before unboxing it and remove all the packaging material from the printer.
- Raise the scanner lid and remove the packaging cover from the scanner glass.
- Clear any packaging material from the input tray and the cartridge access area.
- Interconnect one end of the power cord to the rear of the printer and the other end to the wall outlet.
- Switch on the printer and set your region, language, date and other preferences in the control panel.
- Pull out the output tray and place a stack of plain paper in it.
- Open the cartridge access door and wait for the carriage to rest.
- Unwrap the new ink cartridges and while opening the ink cartridges do not touch the nozzles or electrical contacts.
- Insert the cartridges into the slot and close the access door.
- Open the scanner lid and place the alignment page with the print side down on the scanner glass and wait till the printer completes its cartridge alignment.
- Thus, the HP Officejet 6600 printer setup gets completed successfully.