Are you maintaining your printer correctly? Improper maintenance of the printer may lead to various kinds of the issue starting from ink cartridge to its hardware. You need to troubleshoot all these problems. Read through the major issues and its solutions are mentioned below.
Major Brother HL-2270DW printer issues and its troubleshooting
- Curled or Wrinkled papers may cause the paper jam issue.
- The outdated printer driver may result in the printer offline issue.
- Check the connection between your printer and system.
- Low print quality when printing from systems or mobile devices.
- Low print speed and printing noise are other issues that occur in the printer.
- Issues occur while installing or updating the printer driver.
- Error messages occur when there is no proper communication.
Solutions to resolve the Brother HL-2270DW printer
If the printer displays a blank screen, the printer is not powered up, or it is in the sleep mode. Connect the printer straight to a wall socket and not to surge protector.
If the printer’s control panel displays an error message that will stop the device from printing, clear the particular issue before the system starts the printing process.
An error LED light flashes on the printer’s control panel if the paper jam issue occurs. Raise the front cover and wait for the printer to cool down from its high temperature.
Locate the drum unit and toner cartridge assembly from the Brother printer and remove them. Do not touch any electrical components in the printer as it may lead to the damage of the printer. Seal the front cover.
Remove the jammed paper from the printer using both hands. Make sure that you do not rip the jammed paper in the printer as it may lead to further jam issues.
If the printer encounters any connection issues, check if the network cable and power cable are connected correctly. Check if the printer is connected to a server network.
If yes, disconnect the cable and connect using an end to end connection. If you have done modifications to the configuration settings, reboot the system and then start the printing process.
Check if the IP address on the system and that on the brother printer is same. Select the Apple menu and click System Preferences. Select Network-> Advanced->TCP/IP.
Select the IPv4 and Subnet Mask icon on the printer’s control panel. Check if the router allows proper communication with the network using the Bonjour.
Uninstall the printer driver from the system and reinstall it using the succeeding instructions mentioned on the screen. Clean and maintain the printer regularly to avoid the printer maintenance issue.
Learn HP Printer Troubleshooting Guidelines Go to Our Website...